Skip to content

How to Evaluate a Robot Joint Actuator Supplier

A robot joint actuator supplier should be evaluated on configuration-specific engineering evidence, not only on a torque headline or product photo.

For an early supplier comparison, ask whether the exact model under consideration has usable technical data, mechanical files, electronics information and a path from prototype validation to controlled production release.

Supplier Evaluation Checklist

Area What to request or confirm
Product identity Exact model and configuration being quoted
Torque Continuous torque, peak torque, peak duration and test / operating condition
Speed Rated and maximum output speed at the relevant operating point
Size Complete OD, thickness / length, weight and connector envelope
Mechanical interface Output flange / shaft, locating features, mounting pattern and datums
CAD STEP model for packaging and design-in
2D drawing Interface dimensions, revision status and whether it is a reference or controlled drawing
External loads Radial, axial and overturning load limits where applicable
Encoder Exact encoder / feedback configuration and resolution if published
Driver Integrated or external driver and the quoted hardware / firmware version
Communication CAN, RS485, EtherCAT or another interface for the quoted configuration
Thermal / duty cycle Continuous operation, hold time, peak events and cooling condition
Prototype path Sample availability, validation plan and engineering review
Production path Configuration freeze, controlled drawing and change-control process

A supplier should not be assumed to support a function simply because another model in the same family supports it.

Public Engineering Files Matter

For design-in, the most useful public supplier evidence normally includes:

  • model-specific technical datasheet
  • 2D mechanical reference
  • STEP CAD
  • clear rated / peak torque definitions
  • model-specific driver / encoder / communication information
  • test data where available
  • engineering contact path for unresolved items

Public CAD is useful for packaging, but final production approval should still use the configuration-controlled interface and drawing revision.

SigGear Public Robot Joint References

SigGear publishes planetary and cycloidal robot-joint reference products with downloadable engineering files.

6 Robot Joint Datasheets, 2D & STEP Downloads

Planetary actuator references

Cycloidal joint references

These are public reference platforms. Their published ratings and electronics must not be transferred to a different custom configuration without confirmation.

Questions for the Supplier Before Ordering a Prototype

  1. Which exact model / variant is being quoted?
  2. What is the continuous torque, and under what duty / thermal condition?
  3. What is the peak torque, and how long can the peak be applied?
  4. Which STEP file and 2D drawing correspond to the quoted hardware?
  5. Is the drawing a reference copy or a revision-controlled production drawing?
  6. Which encoder is installed?
  7. Is the driver integrated or external?
  8. Which communication protocol is supported by this exact version?
  9. What current / voltage limits apply?
  10. What external bearing loads are permitted?
  11. What should be tested in the prototype before design freeze?
  12. What changes require a new drawing, firmware or configuration review?

Supplier Comparison: Keep the Boundary Conditions Equal

Do not compare:

  • one supplier's peak torque with another supplier's continuous torque
  • reducer-only weight with another supplier's complete actuator weight
  • a driver-equipped CAD model with a no-driver mechanical version
  • a public reference drawing with a controlled manufacturing drawing
  • maximum speed at no load with rated speed under load

Use the same operating point and configuration boundary for every supplier.

If the Joint Architecture Is Not Decided Yet

If the robot team has not decided between planetary and cycloidal transmission, compare the complete joint requirement first:

Planetary vs Cycloidal Reducer for Robot Joints

If the team is choosing between a complete joint actuator and a separate motor + gearhead:

Integrated Robot Joint vs Motor + Gearhead

For CAN / encoder / driver questions:

Robot Joint CAN, Encoder & Driver Guide

Start a Supplier / Engineering Review

Send the target torque, speed, joint envelope, voltage, external loads, encoder / communication requirement and prototype quantity if known.

Wanrong Wang
International Sales / Sales Engineer, SigGear
wangwanrong@siggear.com

Request CAD, Sample or Engineering Review