10 mm Precision Planetary Gearhead Datasheet (10P)¶
Status: Public engineering evaluation reference
Release date: 2026-10-06
Input-speed policy revised: 2026-11-19. Permissible input speed is evaluated with the selected motor and gearhead configuration.
The SigGear 10P is a 10 mm planetary gearhead platform with one- to four-stage configurations. Performance values below are consolidated from the current canonical product page. Mechanical-interface details are linked to the controlled 2D drawing reference released for this model.
Key Specifications¶
| Parameter | Public value |
|---|---|
| Nominal outer diameter | 10 mm |
| Number of stages | 1-4 |
| gearhead length range | 10.25–18.50 mm |
| Reduction ratio range | 3.5:1–428.7:1 |
| Rated allowable torque range | 127.5–196.1 mN·m |
| Maximum momentary torque range | 255.0–392.3 mN·m |
| Efficiency range | 66–90% |
| Backlash at no load | ≤ 1.5° |
| General continuous input-speed reference | Motor/configuration dependent; confirm selected operating point; motor/configuration dependent |
| Operating temperature range | −40 to 120 °C |
Maximum momentary torque is not a continuous working rating.
High-speed motor note: Certain HS-1013-Q / HS-1015-Q windings can reach 26,000–31,000 rpm at no load. This is not a continuous-speed rating. Confirm the permissible operating point for the exact motor + gearhead combination.
Stage, Ratio and Performance¶
| Stages | Gearbox body length L | Available ratios | Rated allowable torque | Maximum momentary torque | Efficiency |
|---|---|---|---|---|---|
| 1 | 10.25 mm | 3.5 / 4 / 4.75 | 127.5 mN·m | 255.0 mN·m | 90% |
| 2 | 13.00 mm | 12.25 / 14 / 16 / 16.6 / 19 / 22.6 | 147.1 mN·m | 294.2 mN·m | 80% |
| 3 | 15.75 mm | 42.9 / 49 / 56 / 58.2 / 64 / 66.5 / 76 / 79 / 90.25 / 107.2 | 176.5 mN·m | 353.0 mN·m | 73% |
| 4 | 18.50 mm | 150.1 / 171.5 / 196 / 203.7 / 224 / 232.7 / 256 / 266 / 276.4 / 304 / 315.9 / 361 / 375.1 / 428.7 | 196.1 mN·m | 392.3 mN·m | 66% |
Published Load / Shaft Limits¶
| Parameter | Public value |
|---|---|
| Radial load, 10 mm from flange | ≤ 0.6 kgf |
| Shaft axial load | ≤ 0.15 kgf |
| Radial shaft play | ≤ 0.04 mm |
| Thrust shaft play | ≤ 0.15 mm |
Only values currently published for 10P are shown. Do not transfer limits from another frame size.
Motor Matching Reference¶
- Adapted DC motor nominal voltage: 3–36 VDC
- Adapted DC motor power: below 3 W
These are motor-matching conditions, not electrical ratings of the mechanical gearhead.
Mechanical Interface and CAD¶
View 10P Mechanical Interface v1.0
Download 10P Simplified STEP - 4-Stage Reference
Download 10P Full Assembly STEP
A simplified public 4-stage STEP reference is released for early packaging and mechanical Design-In. The full assembly STEP for 10P is now publicly available. It is the original Creo assembly export supplied for this release. The simplified STEP remains a separate 4-stage reference model for preliminary packaging.
For final CAD, provide the selected ratio, stage count and motor interface.
View 2D Drawing & Full Assembly Release Status
Selection Information Required¶
Please provide:
- Required output speed or reduction ratio
- Continuous and momentary output torque
- Motor voltage, power and speed
- Motor shaft diameter and length
- Motor mounting-hole pattern and locating pilot
- Output-shaft requirements
- Radial and axial loads
- Duty cycle and ambient temperature
- Backlash, noise and service-life targets
- Prototype and annual quantity
Related Product¶
Engineering Contact¶
Wanrong Wang
International Sales / Sales Engineer, SigGear
wangwanrong@siggear.com