Skip to content

CPM-100-25 Mechanical Interface v1.0

Status: Public engineering evaluation reference
Release date: 2026-10-06

This page provides the CPM-100-25 mechanical information that is already published and suitable for early packaging and load evaluation.

Warning

This is not a manufacturing drawing. Detailed mounting-hole geometry, tolerances, datums, output-interface dimensions and connector clearances are not published here and must be confirmed from the controlled drawing for the ordered configuration.

Published Mechanical Envelope

Item Published value
Maximum body diameter 100 mm
Overall product thickness 29.5 mm
Product weight 630 g
Allowable radial force 500 N
Allowable axial force 300 N

Confirmed Dual-Encoder Mechanical Variant

The supplied 2D source drawing is labelled SG2556D and corresponds to the 48 mm dual-encoder, driver-equipped CPM-100-25D reference. This source identification does not constitute final engineering release approval.

Its source-drawing envelope includes:

  • Maximum outer diameter: 100 mm
  • Overall axial dimension: 48 mm
  • Product weight: 853 g

This is not the same envelope as the current base public configuration of 29.5 mm / 630 g.

View Dual Encoder Variant Reference

Configuration Considerations

The public product page shows both:

  • A configuration without integrated driver
  • A configuration with integrated driver

Packaging, connector and cable details therefore depend on the selected configuration.

Final mechanical clearance must account for:

  • Driver housing when included
  • Connector and cable routing
  • Customer-side mounting structure
  • Required assembly / service space

Load Evaluation Boundary

Published radial and axial force values are useful for preliminary screening only.

Final suitability still depends on:

  • Load direction
  • Load offset / moment arm
  • Speed
  • Duty cycle
  • Shock or impact load
  • Required bearing life
  • Installation stiffness

Design-In Boundary

Before final mechanical design, confirm:

  • Mounting-hole pattern and thread details
  • Output-side interface geometry
  • Reference datums and tolerances
  • Cable and connector orientation
  • Load direction and moment arm
  • Shock / impact condition
  • Duty cycle
  • Driver-equipped or non-driver configuration

CAD and Controlled Drawing

Original STEP assembly exports are published for two distinct variants:

Original Full STEP · Standard 29.5 mm

Original Full STEP · Dual Encoder + Driver 48 mm

The 48 mm dual-encoder/driver version has a different envelope from the standard 29.5 mm model. No simplified reference STEP is released for CPM-100-25; both links are original full-assembly STEP files. The matching SG2556D 48 mm 2D engineering-reference PDF is now public, but it is not an approved manufacturing-controlled drawing. A configuration-matched approved controlled 2D drawing remains necessary for production.

Request Controlled Drawing

CPM-100-25 Technical Datasheet v1.0 CPM-100-25 Product Page

Engineering Contact

Wanrong Wang
International Sales / Sales Engineer, SigGear
wangwanrong@siggear.com