Skip to content

CPM-100-25 Dual Encoder Variant v1.0

Status: Public variant engineering reference (2D source PDF is not a production-controlled drawing)
Release date: 2026-10-06

The supplied 2D source is identified as SG2556D, the CPM-100-25D dual-encoder driver-equipped variant. Its drawing is published for engineering evaluation, not as an approved manufacturing drawing.

This variant must be kept separate from the current base CPM-100-25 public configuration because its axial package, weight and several operating values are different.

2D Source Reference Values

Parameter Dual-encoder variant
Product family CPM-100-25
Internal drawing / configuration code SG2556D
Maximum outer diameter 100 mm
Overall axial dimension 48 mm
Rated voltage DC 48V
Rated output speed 60 RPM
Rated output torque 25 Nm
No-load output speed 125±10% RPM
No-load current 1.1 A
Weight 853 g

Do Not Mix With the Base Public Configuration

The current base CPM-100-25 public datasheet lists a different package and weight.

For this reason:

  • 29.5 mm / 630 g remains the base public CPM-100-25 configuration.
  • 48 mm / 853 g belongs to the confirmed dual-encoder SG2556D variant.
  • No-load speed and other configuration-dependent values must be read from the matching controlled drawing.
  • Peak torque, backlash, load ratings, driver details and communication functions are not automatically copied from the base configuration unless separately confirmed for the dual-encoder order.

Mechanical Design-In

The controlled SG2556D drawing defines the mounting and output-interface geometry for this dual-encoder configuration.

The 2D source PDF is available for download as a public engineering reference; final manufacturing requires the approved, configuration-matched controlled revision.

CAD Boundary

The 48 mm dual-encoder, driver-equipped configuration is now available as an original full-assembly STEP reference. This file is distinct from the standard 29.5 mm CPM-100-25 CAD.

Download SG2556D Variant · Original Full STEP

Download SG2556D 2D Engineering Reference PDF · 48 mm

The 2D source is not a manufacturing-controlled drawing. Confirm the precise installation variant, tolerances and release revision before production.

CPM-100-25 Technical Datasheet CPM-100-25 Mechanical Interface CPM-100-25 Product Page

Engineering Contact

Wanrong Wang
International Sales / Sales Engineer, SigGear
wangwanrong@siggear.com