Custom Precision Transmission Manufacturer — From Drawing or Motor to Volume Production¶
Start a custom transmission project with the information already available. An existing motor, drawing/STEP, failed reducer or prototype forecast is enough for an initial engineering review.
Match My Motor Review Drawing / STEP Replace / Redesign Existing Gearbox Prototype → Volume
Supplier Qualification Guide: How to Evaluate a Custom Gearbox Manufacturer · Gear Hobbing, Grinding, CMM & Inspection · Source-Backed Manufacturing Facts
Prefer standard engineering files first? Planetary Gearbox PDF / 2D / STEP · Motor PDFs · Joint Module PDF / STEP
The Public Catalog Is Only the Visible Part of SigGear¶
SigGear's public planetary gearboxes, cycloidal reducers and robot joint actuators are important engineering references, but they are not the full scope of the company's work.
Many customer-specific transmission projects cannot be published because they involve confidential drawings, unreleased products, proprietary mechanisms, application details or future production programs protected by confidentiality agreements.
For that reason, the standard products on this site should be understood as:
- real products that engineers can evaluate publicly
- evidence of transmission architectures and manufacturing capability
- starting platforms for modified or custom projects
- public design-in resources with datasheets, drawings and STEP files where released
They should not be treated as the limit of SigGear's engineering or manufacturing capability.
SigGear's Core Strength: Custom Engineering That Can Move Into Production¶
SigGear works with customers that need the transmission to fit the product, rather than forcing the product to fit a catalog gearbox. Customer drawings, STEP models, existing motors, failed gearboxes and physical samples can all be valid starting points for engineering review.
A project can start from:
- a motor that is already selected
- an existing gearbox that needs replacement
- a customer drawing or STEP model
- a mechanism with limited installation space
- a target speed, torque or motion requirement
- a robot joint concept
- a prototype that needs a different ratio, shaft, flange or housing
- a production product that needs a repeatable custom transmission
Depending on the project, engineering review can include:
| Area | Examples |
|---|---|
| Transmission | planetary or cycloidal architecture, stage count, reduction ratio |
| Motor integration | customer motor, SigGear motor, shaft / pinion, pilot and mounting pattern |
| Packaging | diameter, axial length, housing and installation envelope |
| Output interface | shaft, flange, key, mounting pattern and locating features |
| Bearing / loads | radial, axial and overturning-load arrangement |
| Feedback / control | encoder, Hall, driver, cable, connector and communication where applicable |
| Production | drawing control, configuration freeze, inspection points, pilot and repeat manufacturing |
Not every requested change is feasible on every platform. Final specifications require engineering review and, where necessary, prototype validation.
Common Custom Manufacturing Questions¶
Can SigGear develop a gearbox from my motor?¶
Yes, the review can start from an existing motor drawing and operating point. The shaft, pilot, mounting pattern, motor speed, required output speed, load and installation envelope are reviewed together before a gearbox configuration is confirmed.
Can SigGear work from my drawing or STEP model?¶
Yes. A customer 2D drawing, STEP model, mechanism layout or physical sample can be used as a starting point. The drawing defines geometry, while the engineering review also needs operating load, speed, duty cycle and production requirements.
Can SigGear review a gearbox that keeps failing?¶
Yes. The review should include the failed unit or drawings, motor, operating condition, duty cycle and failure evidence such as gear wear, bearing damage, overheating, backlash growth or abnormal noise. The objective is to understand the failure before evaluating a replacement or redesign.
Can a project start with prototypes and later move to volume production?¶
Yes. For applicable projects, SigGear can support the path from prototype and application testing through design refinement, design freeze, pilot preparation and repeatable manufacturing. Prototype quantity, forecast and target schedule help plan the development path.
Can SigGear work under NDA?¶
Yes, confidential projects can be discussed without publishing the customer design. Detailed drawings and proprietary files should be exchanged only after the appropriate confidentiality process is agreed.
Are SigGear's public standard products the full product range?¶
No. The published planetary gearboxes, cycloidal modules and robot joint actuators are public reference platforms. Many customer-specific products and production programs cannot be shown publicly because they are confidential.
From Prototype to Repeatable Volume Manufacturing¶
SigGear's role does not need to end after a prototype works.
For applicable customer programs, the development path can continue through:
Requirement / Existing Design
→ Feasibility Review
→ Preliminary Configuration
→ Prototype / Sample
→ Application Test
→ Design Refinement
→ Design Freeze
→ Pilot Preparation
→ Repeatable Volume Manufacturing
The purpose of this process is to convert a custom engineering solution into a configuration that can be manufactured and inspected repeatedly.
Start With Your Motor / Drawing / Problem OEM Volume Manufacturing & Delivery Planning Prototype → Design-In → Production
Volume Production and Delivery Capability¶
A key part of SigGear's manufacturing value is the ability to support volume production, not only one-off prototypes.
After the configuration is frozen, production planning can cover:
- repeat batch manufacturing
- component machining and gear processing
- assembly planning
- inspection and outgoing verification
- material / component preparation
- production scheduling
- packaging requirements
- batch delivery planning
SigGear also works to support short production lead times for volume programs where the configuration, demand and production plan allow it.
Actual lead time is project-specific. It depends on quantity, customization scope, materials, tooling, controlled drawings, inspection requirements and production scheduling, so SigGear does not publish one universal delivery-time promise for every custom project.
Source-Backed Company Manufacturing Facts¶
SigGear's official company sources provide public evidence that the business extends beyond standard catalog products:
- the 2025 company catalog separates standard products and non-standard customized products
- the published customization workflow runs from engineering / design through sample development, small-batch verification, mass production and delivery
- the newer 2025 company profile states a standalone factory of over 20,000 m²
- the official company-news archive reports Q1 2025 shipments exceeded 550,000 units
The shipment figure is a company-wide historical shipment result. It is not used as a model-specific capacity or future lead-time guarantee.
Source-Backed Manufacturing Facts
Real Manufacturing Behind the Engineering¶
Custom engineering only becomes useful when the design can be manufactured consistently.
SigGear publishes real evidence from its manufacturing environment, including:
- precision machining
- gear processing
- assembly workstations
- quality inspection
- metrology
- transmission testing
- environmental / thermal testing resources where applicable
Manufacturing & Quality Evidence Testing, Metrology & Validation Evidence
These public photographs and records demonstrate real manufacturing and inspection activity. They do not create unsupported model-specific performance claims.
Why Many Custom Products Are Not Shown Publicly¶
Custom transmission work often relates directly to the customer's product architecture.
Publicly displaying those projects could expose:
- customer product designs
- unreleased mechanisms
- proprietary interfaces
- customer STEP models and drawings
- production plans
- supplier relationships
- performance targets or project-specific technical details
Where confidentiality applies, SigGear does not use those projects as public marketing case studies.
Instead, SigGear uses public standard products, real manufacturing evidence, engineering documentation and released test records to show the capabilities that can be verified without exposing customer information.
What the Standard Product Range Is For¶
The public products remain useful because they let an engineer see real technical starting points:
- 8–42 mm Precision Planetary Gearboxes
- Planetary Robot Joint Actuators
- Cycloidal Robot Joint Modules
- Motor + Gearbox Integration
A custom project may:
- use one of these platforms directly
- modify an interface around an existing platform
- change ratio, shaft, flange, housing or motor interface
- use the platform as a reference while another configuration is developed
What to Send for a Custom Manufacturing Review¶
Send whatever is already available:
- application and mechanism
- drawing, STEP model or marked-up sketch
- existing motor or motor preference
- output speed
- continuous and peak load / torque
- installation envelope
- shaft and mounting constraints
- duty cycle
- prototype quantity
- expected production quantity or forecast, if known
- target schedule, if timing is important
A complete specification is not required before the first review.
Start a Custom Transmission Project¶
Wanrong Wang
International Sales / Sales Engineer, SigGear
wangwanrong@siggear.com
Start Custom Engineering Review Custom Precision Transmission Engineering