Skip to content

22 mm Precision Planetary Gearhead Datasheet (22P)

Status: Public engineering evaluation reference
Release date: 2026-10-06

Input-speed policy revised: 2026-11-19. Permissible input speed is evaluated with the selected motor and gearhead configuration.

The SigGear 22P is a 22 mm planetary gearhead platform with one- to four-stage configurations. Performance values below are consolidated from the current canonical product page. Mechanical-interface details are linked to the controlled 2D drawing reference released for this model.

Key Specifications

Parameter Public value
Nominal outer diameter 22 mm
Number of stages 1-4
gearhead length range 22.6–38.5 mm
Reduction ratio range 3.5:1–509.1:1
Rated allowable torque range 784.5–2451.7 mN·m
Maximum momentary torque range 1569.1–4903.3 mN·m
Efficiency range 66–90%
Backlash at no load ≤ 1.5°
Continuous permissible input speed Motor/configuration dependent; confirm selected operating point
Operating temperature range −40 to 120 °C

Maximum momentary torque is not a continuous working rating.

Stage, Ratio and Performance

Stages Gearbox body length L Available ratios Rated allowable torque Maximum momentary torque Efficiency
1 22.6 mm 3.5 / 4 / 4.75 784.5 mN·m 1569.1 mN·m 90%
2 27.9 mm 12.25 / 14 / 16 / 16.6 / 19 / 22.6 980.7 mN·m 1961.3 mN·m 80%
3 33.2 mm 42.9 / 49 / 56 / 58.2 / 64 / 66.5 / 76 / 79 / 90.25 / 107.2 1471.0 mN·m 2942.0 mN·m 73%
4 38.5 mm 150.1 / 171.5 / 196 / 203.7 / 224 / 232.7 / 256 / 266 / 276.4 / 304 / 315.9 / 361 / 375.1 / 428.7 / 509.1 2451.7 mN·m 4903.3 mN·m 66%

Published Load / Shaft Limits

Parameter Public value
Radial load, 10 mm from flange ≤ 1.6 kgf
Shaft axial load ≤ 0.5 kgf
Radial shaft play ≤ 0.04 mm
Thrust shaft play ≤ 0.2 mm

Only values currently published for 22P are shown. Do not transfer limits from another frame size.

Motor Matching Reference

  • Adapted DC motor nominal voltage: 3–36 VDC
  • Adapted DC motor power: below 25 W

These are motor-matching conditions, not electrical ratings of the mechanical gearhead.

Mechanical Interface and CAD

View 22P Mechanical Interface v1.0

Download 22P Simplified STEP - 4-Stage Reference

A simplified public 4-stage STEP reference is released for early packaging and mechanical Design-In. The full assembly STEP is included in SigGear's public release scope. The original assembly source has been identified; its public download will be activated after binary upload and revision verification.

For final CAD, provide the selected ratio, stage count and motor interface.

View 2D Drawing & Full Assembly Release Status

Selection Information Required

Please provide:

  • Required output speed or reduction ratio
  • Continuous and momentary output torque
  • Motor voltage, power and speed
  • Motor shaft diameter and length
  • Motor mounting-hole pattern and locating pilot
  • Output-shaft requirements
  • Radial and axial loads
  • Duty cycle and ambient temperature
  • Backlash, noise and service-life targets
  • Prototype and annual quantity

View 22P Product Page

Engineering Contact

Wanrong Wang
International Sales / Sales Engineer, SigGear
wangwanrong@siggear.com