36 mm Compact Precision Planetary Gearhead (36P)¶
Download Datasheet PDF Download 2D Drawing PDF Download Full Assembly STEP Download Simplified 4-Stage STEP · Reference
| Ø Diameter | Reduction ratios | Gearhead body length | Rated allowable torque | Backlash |
|---|---|---|---|---|
| 36 mm | 3.66:1–625:1 | 30.6–61.5 mm | 3922.7–9806.6 mN·m | ≤ 1.2° |
Custom 36P interface or motor fit? Match my motor · Review my drawing / STEP · Replace / redesign existing gearbox · Prototype → volume
More: Stage-by-stage ratios · Online technical specifications · Mechanical drawing preview · All 12 models

Product Identity¶
| Item | Description |
|---|---|
| Model | 36P |
| Product type | Compact precision planetary gearhead (planetary gearbox) |
| Nominal outer diameter | 36 mm |
| Number of stages | 1 to 4 |
| Housing material | Steel |
| Gear material | Steel |
| Output bearing | Ball Bearing |
| Manufacturing process | Machining |
Key Specifications¶
| Parameter | Published value |
|---|---|
| Nominal outer diameter | 36 mm |
| Gearhead length range | 30.6–61.5 mm |
| Reduction ratio range | 3.66:1–625:1 |
| Rated allowable torque range | 3922.7–9806.6 mN·m |
| Maximum momentary torque range | 7845.3–19613.3 mN·m |
| Efficiency range | 66–90% |
| Backlash at no load | ≤ 1.2° |
| Permissible gearhead input speed, continuous operation | Motor/configuration dependent; confirm selected operating point |
| Operating temperature | −40 to 120 °C |
| Adapted DC motor voltage | 3–48 VDC |
| Adapted DC motor power | below 150 W |
Maximum momentary torque is not a continuous working rating.
Stage, Ratio and Performance Table¶
| Stages | Gearhead length L | Available reduction ratios | Rated allowable torque | Maximum momentary torque | Efficiency |
|---|---|---|---|---|---|
| 1 | 30.6 mm | 3.66 / 4.2 / 5.0 | 3922.7 mN·m | 7845.3 mN·m | 90% |
| 2 | 40.9 mm | 13.4 / 15.4 / 17.6 / 18.3 / 21 / 25 | 5884.0 mN·m | 11768.0 mN·m | 80% |
| 3 | 51.2 mm | 49 / 56.3 / 64.6 / 67 / 74.1 / 76.9 / 88.2 / 91.5 / 105 / 125 | 7845.3 mN·m | 15690.6 mN·m | 73% |
| 4 | 61.5 mm | 179.4 / 205.9 / 236.3 / 245.1 / 271.2 / 281.3 / 311.2 / 322.8 / 334.9 / 370.5 / 384.3 / 441 / 457.5 / 525 / 625 | 9806.6 mN·m | 19613.3 mN·m | 66% |
Shaft, Load and Operating Limits¶
| Parameter | Published value |
|---|---|
| Housing material | Steel |
| Gear material | Steel |
| Bearing at output | Ball Bearing |
| Radial load, measured 10 mm from flange | ≤ 10.0 kgf |
| Shaft axial load | ≤ 6.0 kgf |
| Radial shaft play | ≤ 0.04 mm |
| Thrust shaft play | ≤ 0.3 mm |
| Backlash at no load | ≤ 1.2° |
| Maximum permissible speed, continuous operation | Motor/configuration dependent; confirm selected operating point |
| Operating temperature | −40 to 120 °C |
Motor Compatibility¶
The adapted-motor sheet identifies DC motors with a nominal voltage of 3–48 VDC and power below 150 W. If the motor cannot meet the gearhead installation requirements, the motor and gearhead interface details need to be negotiated separately.
These are adapted-motor conditions, not an electrical voltage or power rating for the mechanical gearhead itself. Confirm the motor shaft, mounting interface, input speed, duty cycle and operating point for the selected gearhead ratio.
Dimensions and Interface¶
The published drawing shows a 36 mm body diameter and stage-dependent gearhead lengths of 30.6, 40.9, 51.2 and 61.5 mm. Use the approved drawing for shaft geometry, mounting holes, input-interface details and tolerance notation.
STEP Notes¶
The Full Assembly STEP is the published original Creo assembly. The Simplified STEP is a separate 4-stage reference for preliminary mechanical packaging. The 36P 2D outline drawing is the original SG01PD36 interface reference. The body length L ±0.3 mm is configuration-dependent; confirm stage, ratio and motor mating dimensions before production.
Back to the 8–42 mm product catalogue
Potential OEM applications (suitability requires engineering review): Electric pruning shears · Outdoor machinery · AGV/AMR auxiliary motion · All applications.
Motor + Gearhead Assembly: Motor matching and custom integration.