Skip to content

20–32 mm Miniature Precision Planetary Gearboxes

Five published frame sizes: 20P · 22P · 24P · 28P · 32P. Compare diameter, ratio, gearhead length and rated allowable torque, then download the real PDF / 2D / STEP files.

Find by Motor RPM / Output RPM / Torque I Already Have a Motor I Have a Drawing / STEP Replace / Redesign Existing Gearbox Prototype → Volume Production

Direct PDF and STEP Downloads

Gearbox model Datasheet PDF 2D mechanical drawing Full assembly STEP
20P · Ø20 mm PDF datasheet 2D drawing Full STEP
22P · Ø22 mm PDF datasheet 2D drawing Full STEP
24P · Ø24 mm PDF datasheet 2D drawing Full STEP
28P · Ø28 mm PDF datasheet 2D drawing Full STEP
32P · Ø32 mm PDF datasheet 2D drawing Full STEP

Miniature Product Photos

Photographs show the actual labelled SigGear reference models. For production dimensions and load limits, refer to each model's controlled datasheet and 2D drawing.

Authentic SigGear 20P 20 mm Miniature planetary gearhead product photo
Miniature · 20P (Ø20 mm)View data, PDF & STEP
Authentic SigGear 22P 22 mm Miniature planetary gearhead product photo
Miniature · 22P (Ø22 mm)View data, PDF & STEP
Authentic SigGear 24P 24 mm Miniature planetary gearhead product photo
Miniature · 24P (Ø24 mm)View data, PDF & STEP
Authentic SigGear 28P 28 mm Miniature planetary gearhead product photo
Miniature · 28P (Ø28 mm)View data, PDF & STEP
Authentic SigGear 32P 32 mm Miniature planetary gearhead product photo
Miniature · 32P (Ø32 mm)View data, PDF & STEP

Compare Published Specifications

Nominal diameter Reduction ratio range Gearhead body length Rated allowable torque Backlash
20P · 20 mm 4:1–1296:1 20.1–34.5 mm 588.4–1274.9 mN·m ≤ 1.5°
22P · 22 mm 3.5:1–509.1:1 22.6–38.5 mm 784.5–2451.7 mN·m ≤ 1.5°
24P · 24 mm 3.83:1–759.7:1 24.6–42.0 mm 980.7–2942.0 mN·m ≤ 1.2°
28P · 28 mm 3.83:1–759.7:1 25.6–44.5 mm 1961.3–4903.3 mN·m ≤ 1.2°
32P · 32 mm 3.5:1–509.1:1 28.05–52.95 mm 3432.3–7845.3 mN·m ≤ 1.2°

These are published SigGear planetary gearbox platforms with direct engineering files. They can be used for initial supplier comparison and mechanical design-in without submitting an inquiry first.

Selection note: Diameter is the gearbox housing size, not the complete motor + gearhead length. The torque values above are rated allowable ranges across stages, not a constant rating for every ratio; use each model's stage table for final screening. Maximum momentary torque is not a continuous rating.

If the Motor Is Already Selected

Do not select a gearbox from motor diameter alone. For an interface review, provide the motor model or drawing, loaded operating speed, shaft diameter and usable length, mounting-hole pattern / locating pilot, target output speed, continuous / peak load and available assembly length.

A preliminary ratio can be screened from loaded motor speed ÷ target output speed. Final feasibility still depends on the selected stage / ratio, rated torque, motor interface, duty cycle and operating point.

Planetary Gearbox for an Existing Motor Quick Ratio / Torque Selector + Files Compare all 12 sizes

Other planetary gearbox sizes: Micro 8–16 mm · Compact 36–42 mm

For a controlled production configuration, confirm the chosen ratio/stage, shaft and motor mating interface using the 2D drawing and engineering review. The simplified 4-stage reference STEP is available from the complete engineering download centre and is not the full assembly.