Skip to content

Robot Joint Actuator Datasheets, 2D Drawings & STEP

Select a model, compare rated torque and speed, then download PDF / 2D / STEP. Six models · 6 Datasheets · 4 available 2D reference PDFs · 8 full-assembly STEP variants.

How to Evaluate a Robot Joint Actuator Supplier Robot Joint Selection Guide Planetary vs Cycloidal

Need a Joint That Does Not Match These Six Models?

The six public models are reference platforms, not the limit of SigGear's custom joint capability.

Review My Mechanism / STEP Custom Robot Joint Development Encoder / Driver / Communication Review Prototype → Volume Production

Manufacturing proof: Manufacturing & Quality Evidence · Source-Backed Manufacturing Facts · Equipment & Inspection Capability

Model · OD × thickness · ratio · rated / peak torque · rated speed Datasheet 2D reference drawing Original Full STEP
SG-6010C · Planetary
Ø80 × 34.07 mm · 9.67:1
6 / 18 N·m · 310 rpm
PDF Request STEP
SG-6010D · Planetary
Ø80 × 58.77 mm · 28.13:1
16 / 50 N·m · 100 rpm
PDF 2D PDF STEP
SG-8021 · Planetary
Ø100 × 42.6 mm · 9.25:1
10 / 30 N·m · 160 rpm
PDF Request Driver STEP
CPM-78-39 · Cycloidal
Ø78.7 × 35.8 mm · 39:1
20 / 52 N·m · 48 rpm
PDF SG2368B cross-reference pending STEP
CPM-80-25 · Cycloidal
Ø80 · 25:1
10 / 50 N·m · 120 rpm
PDF No driver · 29.7 mm · With driver · 41.2 mm No driver · With driver
CPM-100-25 · Cycloidal
Ø100 · 25:1
25 / 75 N·m · 60 rpm
PDF SG2556D · 48 mm only Standard · 29.5 mm · Dual encoder + driver · 48 mm
Additional simplified STEP downloads

Release scope: Datasheets are Public Reference Rev0.1. The new 2D files are supplier-provided, render-verified engineering reference copies, not revision-controlled manufacturing drawings. STEP files are original full-assembly exports for preliminary design-in. SG-8021 STEP is driver-equipped only; CPM-80-25 variants have different thicknesses; SG2556D / 48 mm must not be used for standard CPM-100-25 / 29.5 mm. Confirm revision, interface, datums, tolerances and duty cycle before production. Request controlled drawing.