Skip to content

14 mm Precision Planetary Gearhead Datasheet (14P)

Status: Public engineering evaluation reference
Release date: 2026-10-06

Input-speed policy revised: 2026-11-19. Permissible input speed is evaluated with the selected motor and gearhead configuration.

The SigGear 14P is a 14 mm planetary gearhead platform with one- to four-stage configurations. Performance values below are consolidated from the current canonical product page. Mechanical-interface details are linked to the controlled 2D drawing reference released for this model.

Key Specifications

Parameter Public value
Nominal outer diameter 14 mm
Number of stages 1-4
gearhead length range 15.2–26.6 mm
Reduction ratio range 3.75:1–443.3:1
Rated allowable torque range 343.2–588.4 mN·m
Maximum momentary torque range 686.5–1176.8 mN·m
Efficiency range 66–90%
Backlash at no load ≤ 1.5°
Continuous permissible input speed Motor/configuration dependent; confirm selected operating point
Operating temperature range −40 to 120 °C

Maximum momentary torque is not a continuous working rating.

Stage, Ratio and Performance

Stages Gearbox body length L Available ratios Rated allowable torque Maximum momentary torque Efficiency
1 15.2 mm 3.75 / 4.38 / 4.66 343.2 mN·m 686.5 mN·m 90%
2 19.0 mm 14 / 16.4 / 17.5 / 19.2 / 20.4 / 21.7 392.3 mN·m 784.5 mN·m 80%
3 22.8 mm 52.7 / 61.6 / 65.5 / 71.9 / 76.5 / 81.4 / 84 / 89.4 / 95.1 / 101.2 490.3 mN·m 980.7 mN·m 73%
4 26.6 mm 197.75 / 231 / 245.74 / 269.8 / 287 / 305.4 / 315.1 / 335.25 / 356.7 / 368 / 379.5 / 391.6 / 416.6 / 443.3 588.4 mN·m 1176.8 mN·m 66%

Published Load / Shaft Limits

Parameter Public value
Radial load, 10 mm from flange ≤ 0.8 kgf
Shaft axial load ≤ 0.25 kgf
Radial shaft play ≤ 0.04 mm
Thrust shaft play ≤ 0.2 mm

Only values currently published for 14P are shown. Do not transfer limits from another frame size.

Motor Matching Reference

  • Adapted DC motor nominal voltage: 3–36 VDC
  • Adapted DC motor power: below 5 W

These are motor-matching conditions, not electrical ratings of the mechanical gearhead.

Mechanical Interface and CAD

View 14P Mechanical Interface v1.0

Download 14P Simplified STEP - 4-Stage Reference

Download 14P Full Assembly STEP

A simplified public 4-stage STEP reference is released for early packaging and mechanical Design-In. The full assembly STEP for 14P is now publicly available. It is the original Creo assembly export supplied for this release. The simplified STEP remains a separate 4-stage reference model for preliminary packaging.

For final CAD, provide the selected ratio, stage count and motor interface.

View 2D Drawing & Full Assembly Release Status

Selection Information Required

Please provide:

  • Required output speed or reduction ratio
  • Continuous and momentary output torque
  • Motor voltage, power and speed
  • Motor shaft diameter and length
  • Motor mounting-hole pattern and locating pilot
  • Output-shaft requirements
  • Radial and axial loads
  • Duty cycle and ambient temperature
  • Backlash, noise and service-life targets
  • Prototype and annual quantity

View 14P Product Page

Engineering Contact

Wanrong Wang
International Sales / Sales Engineer, SigGear
wangwanrong@siggear.com