Skip to content

Custom Gearbox & Transmission Review — Start From Your Motor, Drawing or Failed Unit

Many precision transmission projects do not start with a catalog model.

They start with a practical engineering problem:

“Here is my motor.”

“Here is our drawing.”

“Our existing gearbox needs replacement / redesign.”

“We need 20 prototypes first, then thousands in production.”

These are exactly the kinds of projects SigGear is built to review.

SigGear is a precision transmission manufacturer focused on custom engineering, prototype development, repeatable volume manufacturing and production delivery. The public 8–42 mm planetary gearboxes, cycloidal reducers and robot joint actuators are reference platforms; many customer-specific products and production programs remain confidential.

Start an Engineering Review Custom Manufacturing & Volume Production

“Here Is My Motor.”

If the motor is already selected, the transmission needs to be reviewed around the real motor interface and operating point.

Useful information includes:

  • motor model or drawing
  • loaded operating speed
  • shaft diameter and usable length
  • locating pilot
  • mounting-hole pattern
  • target output speed
  • continuous and peak load
  • maximum transmission diameter and available assembly length

The final reduction ratio does not need to be known before the first review.

Planetary Gearbox for an Existing Motor Start Existing-Motor Review

“Here Is Our Drawing / STEP / Sample.”

A project can also start from a customer STEP model, mechanism drawing, installation envelope, marked-up sketch or physical sample.

SigGear can review:

  • available diameter and axial length
  • motor-side interface
  • output shaft / flange
  • locating features
  • ratio and speed requirement
  • bearing / external-load arrangement
  • encoder, driver and communication requirements where applicable
  • manufacturability of the proposed transmission arrangement

A simple mechanism drawing, STEP model or physical sample can be enough to begin identifying the missing engineering inputs.

Custom Gearbox From Drawing / STEP Start Drawing / STEP Review

“Our Existing Gearbox Needs Replacement / Redesign.”

If an existing transmission must be replaced because it is failing, discontinued or no longer fits the required ratio / output / interface, the review should start from the actual unit, interfaces and operating condition.

Useful inputs include:

  • old gearbox model / drawing
  • actual motor
  • operating speed
  • continuous and peak load
  • duty cycle
  • photos of failed components
  • approximate service hours / cycles
  • output shaft and mounting interface
  • available installation space
  • physical sample if available

The objective is not to promise a “perfect replacement” from a photo. It is to identify what must remain unchanged, what needs to change, and why the original unit no longer meets the project requirement before evaluating a revised transmission.

Replacement Planetary Gearbox Review Start Replacement / Redesign Review

“We Need Prototypes First, Then Thousands in Production.”

A custom project should be evaluated as a manufacturing program, not only as a sample request.

A typical path can be:

Requirement / Existing Design
→ Feasibility Review
→ Prototype / Sample
→ Application Test
→ Design Refinement
→ Design Freeze
→ Pilot Preparation
→ Repeatable Volume Manufacturing

For production-oriented projects, useful commercial / manufacturing information includes:

  • prototype quantity
  • expected annual volume or forecast
  • target pilot timing
  • target production timing
  • critical inspection requirements
  • packaging / labeling requirements where relevant
  • expected batch / delivery plan

SigGear works to support short production lead times for applicable volume programs after the configuration, quantity and production plan are confirmed. Actual lead time remains project-specific.

Prototype → Volume Production Start Prototype-to-Volume Review

Confidential / NDA Projects

Many custom precision-transmission programs involve unreleased customer products, proprietary mechanisms and future production plans.

SigGear does not publish confidential customer designs as marketing case studies.

If an NDA is required before detailed drawings are shared, the first discussion can stay at the level of:

  • application category
  • target motion
  • envelope
  • torque / speed
  • production volume
  • confidentiality requirement

Detailed STEP models, drawings and project files can be exchanged after the appropriate confidentiality process is agreed.

What SigGear Can Develop or Review

Depending on engineering feasibility:

  • custom planetary gearboxes / gearheads
  • custom cycloidal reducers
  • robot joint modules
  • motor + gearbox assemblies
  • customer-motor integration
  • reduction ratio
  • input pinion / shaft
  • output shaft / flange
  • housing and mounting features
  • bearings and external-load arrangement
  • encoder / driver / cable / connector integration where applicable
  • prototype and production configuration

Not every parameter can be changed independently, and a change to ratio, motor, size or load can affect other parts of the design.

Public Products Are Evidence, Not the Boundary

SigGear publishes standard products because engineers need something real to inspect:

These public products demonstrate real engineering and manufacturing capability. They do not represent the full range of confidential customer-specific transmission work.

Start With What You Already Have

You can send:

  • a motor
  • a drawing
  • a STEP model or drawing screenshot
  • a failed gearbox
  • a mechanism sketch
  • a torque / speed requirement
  • a robot joint concept
  • a prototype requirement
  • a production forecast

Wanrong Wang
International Sales / Sales Engineer, SigGear
wangwanrong@siggear.com

Start Custom Transmission Review